1999-2022 Chevy Silverado Oil Capacity Free Lookup

Chevy Silverado oil capacity and oil type vary from model to model, year to year, engine to engine, and weather to weather.

A 2020 Silverado 1500 3.0L V6 takes 7 quarts of 0W-20 oil (All TEMPS) while a 2020 Silverado 1500 2.7L I4 needs 6 quarts of 5W-30 (All TEMPS) or 0W-30 (Below -29°C).

When replacing the engine oil, you should do it with only the right products. Different engine models require different oil viscosity to effectively lubricate moving parts.

And if you live in cold regions, the oil you buy should work well under that low temperature.

This article covers everything you must know about 1999-2022 Chevy Silverado oil capacity and oil types.

Especially, you can lookup your vehicle oil capacity and oil type right below:

1999-2022 Chevy Silverado Oil Capacity and Oil Type: FREE Lookup

Select “Year” then Select “Model & Engine Size” to find the oil capacity and oil type for your vehicle.

To Reset, click on the values shown below the filter.

Leave a comment (at the end of the post) if you cannot find yours.

Oil Types And Suitable Oil Viscosity For Chevy Silverado

Oil is the lifeblood of your engine. Gasoline may be responsible for power production, but without appropriate engine oil, its life becomes short. Oil continuously circulates in the engine to lubricate all moving parts to reduce friction that might generate heat and cause wear.

Your choice of engine oil will significantly affect the engine’s life. You also need to change the oil at the most appropriate time. Luckily, the onboard oil life monitoring system checks the condition of the oil and informs you when a change is necessary. But what factors determine the type of engine oil to use?

Your choice of engine oil depends on the Chevrolet Silverado model year and the engine type. When looking for engine oil for your pickup truck, consider its viscosity. This is the thickness of the oil. Different standards suit various engine types and climatic conditions.

For the Silverado 1500, the most recommended oil types are the SAE 5W-30 or SAE 10W-30. What do these coded specifications mean? Let us break it down for easy understanding.

SAE – Society of Automotive Engineers

5 – Oil viscosity at low temperatures (Winter Viscosity)

W – Winter

30 – Oil viscosity at high temperature (Summer Viscosity)

The lower the winter viscosity, the lower temperatures are accepted by the oil. The higher the summer viscosity, the higher temperatures the oil can accept.

5W30 oil has a winter viscosity grade of five, which means that it is less viscous at low temperatures than 10w30 oil. The summer viscosity grade of 5W-30 oil is 30 meaning it’s less viscous at high temperatures than 5w50.

Consider engine type and size and ambient temperature when looking for engine oil. You need to know the engine model year and whether it is a diesel or gas engine. Also, consider the weather. Some engine oil types are best for cold conditions, while others work best in a hot environment.   

If your Silverado has a light-duty diesel engine under the hood, Dexos2 full-synthetic engine oil is the best choice. But if it has a heavy-duty Duramax diesel engine, go for engine oil with higher viscosity. Gasoline engines use Dexos1 full-synthetic oils. These specifications are on the label. So, check before you buy.

Silverado 1500 Oil Capacity and Oil Type

1999-2006 Silverado 1500 Engine Sizes, Oil Capacity, and Oil Type

Chevrolet made a series of engines over this period with varying oil requirements. Before you do any oil change, check the manual for what the manufacturer recommends for your Chevy engine.

Chevrolet Silverado was first released in 1998 as a 1999 model. These first-generation pickup trucks had a 195-hp 4.3-liter V6, a 255 hp 4.8-liter V8, or a 270-hp 5.3-liter V8 engine. Other variants introduced later had higher performance.

The LU3 Vortec Silverado Classic 4.3L V6 needs 10W30 (Above -18°C) and 5W30 (All TEMPS), but  SAE 5W30 is preferred. The 4.8L V8 engines require 10W30 (Above -18°C)

5W30 (All TEMPS), but SAE 5W30 is preferred.

On the other hand, 5.3L V8 6 needs 10W30 (Above -18°C) and 5W30 (All TEMPS). So, SAE 5W30 is preferred.

But once again, the operating temperature or weather coefficient depends on the environmental temperature. You can check with the car manufacturer or authorized dealer in your region about the oil type you should use.

2007-2013 Silverado 1500 Engine Sizes, Oil Capacity, and Oil Type

The second-generation Silverado 1500 had many feature upgrades from the previous generation. These included a new and more powerful 367 hp, 6.0-liter Vortec 6000 V8 engine and the 403 hp, 6.2-liter Vortec 6200 V8 engine. These engines came with 6-speed transmissions and electronic stability controls.

Many engine types were released during this period for different Chevrolet Silverado models.

Note: If in an area of extreme cold, where the temperature falls below the specified temperature range, use 5W-30 synthetic or 0W-30 meeting Original Equipment specifications. These provide easier starting of the engine at extremely low temperatures.

Once again, the oil type recommendations depend on the environmental temperature. If you live in cold regions, engine oils that work at 0 degrees will give you a better performance. 

2014-2018 Silverado 1500 Engine Sizes, Oil Capacity, and Oil Type

Third-generation Chevrolet Silverado 1500 featured many interior and exterior upgrades, including the engine. These Silverado models had 4.3 L LV3 GM EcoTec3 4300 V6 or 5.3 L L83 GM EcoTec3 5300 V8 engines under the hood. 

The 4.3L LV3 GM EcoTec3 4300 V6 with an oil capacity of 6 quarts has been in production since 2014. The engine produces 285 hp at 5,300 rpm and a torque of 305 lb-ft at 3,900 rpm. If you have it under the hood and it is time to change the oil, consider Dexos SAE 5W-30 semi-synthetic motor oil. It is what the manufacturer recommends for better performance and longer service life.

The 5.3L L83 GM EcoTec3 5300 V8 which has an oil capacity of 8 quarts is a new engine that shows the GM’s engineering prowess. It uses continuously variable timing that has a high output power of 355 / 250 hp at 5600 rpm. If you are lucky to have one of these in your Silverado 1500 pickup truck, use only SAE 0W-20 engine oil.

2019-2022 Silverado 1500 Engine Sizes, Oil Capacity, and Oil Type

The oil type you buy depends on which of the five engines your truck has.

All fourth-general 2019 Chevrolet Silverado 1500 come in four different engine options. The base engine for lower trims is the 285 hp, 4.3L EcoTec3 Flex Fuel-Capable V6 gasoline engine.

On mid-level trims, you will find 310 hp, 2.7L Turbocharged Inline 4-Cylinder (I4) gasoline engines under the hood. Some upper-levels came with 420-hp, 6.2L EcoTec3 V8 gasoline engines. Some other engine options are 3.0L V6 and 5.3L V8. 

Refer to the above chart for recommended oil viscosity of various Silverado 1500 engine sizes in this generation.

Silverado 1500HD Oil Capacity and Oil Type

The 2001-2007 Silverado 1500HD needs oil that meets the manufacturer’s specifications. If it is time to change your oil, go for one with a viscosity of 5W-30. It should be synthetic and matched to the temperature in your region. 

The mentioned viscosity can work in many different environments. But if you experience temperatures above 0 degrees Fahrenheit, go for SAE 10W-30 engine oils.     

2001-2007 Silverado 1500HD trucks have a 6.0L V8 engine with an oil capacity of 6 quarts.

Silverado 2500 Oil Capacity and Oil Type

The 1999-2004 Chevrolet Silverado 2500 had either the Vortec 5.3L V8 or 6.0L V8 engine under the hood. The 6.0 Liter Vortec engine by General Motors is also based on the small-block V8 platform. It was first introduced in 1999 and was in production up to 2019 when Vortec 6.2 replaced it.

The Vortec 6.0 had nine different variations throughout its production years. It managed to stay in production for that long because of its reliability and dependability.

The LQ4 is the most common Vortec 6.0 Chevy engine. Most trucks manufactured between 1999 and 2007 had them. If you have a Silverado 2500 made within this period, the most likely engine under the hood is LQ4. But you have to check to confirm because there are some exceptions.

Both 5.3L and 6.0L engines in Silverado 2500 have an oil capacity of 6 quarts and use oil viscosity of 10W-30 (Above -18°C) or 5W-30 (All TEMPS), which are what the manufacturer recommends for optimal performance and a long lifespan.

Silverado 2500HD Oil Capacity and Oil Type

2001-2006 Silverado 2500HD Oil Capacity and Oil Type

The best engine oil type and oil capacity of your Chevrolet Silverado 2500HD depend on which of the three engines (6.0L, 6.6L, or 8.1L) you have under the hood.

The HD denotes a heavy-duty variant of Chevy Silverado heavy-duty light trucks. The 2500HD was available in four different engine options. The first one came with LB7 Duramax V8 with 300 hp (224 kW) at 3100 rpm and 520 lb-ft of torque at 1800 rpm. 

Other models had LLY Duramax V8 or LBZ Duramax V8 under the hood. A few variants had the Vortec 8100 V8 with 340 at 4200 rpm and 455 lb-ft of torque at 3200 rpm under the hood.

The LB7, LLY, and LBZ are all 6.6L Duramax V8 engines. Their production years span 2001-2004, 2004-2005, and 2006-2007, respectively.

2007-2013 Silverado 2500HD Engine Sizes, Oil Capacity, and Oil Type

The 2007-2013 Chevrolet Silverado 2500HD trucks come with two engine options. The first type is a gasoline-powered 6.0L V-8 engine. This is capable of 353 hp and 373 lb-ft of torque. 

A turbocharged 6.6L V-8 Duramax diesel engine is the other option. This engine type has an output power of 397 hp and 765 lb-ft of torque.

The bi-fuel option for the 6.0L V-8 engine became available in 2013. Buyers could choose either gasoline or compressed natural gas (CNG), but performance slightly drops for CNG.

The 6.0L V-8 engine has an oil capacity of 6 quarts, while the 6.6L V-8 Duramax diesel engine has 10 quarts. The recommended oil type for the former is SAE 5W-30. On the other hand, SAE 15W-40 engine oil is the best choice for the other engine option. 

But if the temperature in your region falls below 0 degrees Fahrenheit, go for SAE 5W-40 engine oil for your 6.6L V-8 Duramax diesel engine.

2014-2019 Silverado 2500HD Engine Sizes, Oil Capacity, and Oil Type

There is not much change in the engine design between this generation and the previous ones. 

The trucks came with a 6.0L gas V-8 or LML Duramax 6.6L turbo-diesel engine. Newer models are also available as bi-fuel compressed natural gas systems and bi-fuel-compatible versions.

The recommended oil and oil capacities of the engines don’t change. The 6.0L gas V-8 needs 6 quarts of oil while LML Duramax 6.6L turbo-diesel engine needs 10 quarts. 

Regarding the oil viscosity, the manufacturer recommends SAE 5W-30 and SAE 15W-40 for gasoline and diesel engines, respectively. But if you live in cold regions with ambient temperatures below 0 degrees Fahrenheit, choose SAE 5W-40 oil for the diesel engine.

2020-2022 Silverado 2500HD Oil Capacity and Oil Type

The 2020 Silverado 2500HD comes with a standard 6.6L V-8 L8T engine that produces 401 hp and 464 lb-ft of torque. An optional L5P Duramax diesel 6.6L V-8 carried over from the previous generation is also available. The oil capacity of the 6.6L L8T is 8 quarts while the L5P requires 10 quarts.

The specifications for recommended oil type don’t change. You also need SAE 5W-30 for gasoline and SAE 15W-40 for diesel engines.

Silverado 3500HD Oil Capacity and Oil Type

2001-2006 Silverado 3500HD Oil Capacity and Oil Type

The Silverado 3500HD offers the same engine and transmission features as the Silverado 2500HD. The only difference between the two models is the twin rear wheels and stronger suspension in the 3500HD. These design modifications made the trucks suitable for towing and hauling high-weight cargo.

2007-2013 Silverado 3500HD Oil Capacity and Oil Type

The engine you will find in the 2007-2014 Silverado 2500HD is the same under the hood of the 3500HD. These models also had a 6-quart-oil 6.0L V-8 engine or a 10-quart-oil 6.6L V-8 Duramax diesel engine. 

The oil types recommended for the two are SAE 5W-30 and SAE 15W-40, respectively. But if you live in cold regions, your diesel engine requires an SAE 5W-40 oil type.

2014-2019 Silverado 3500HD Engine Sizes, Oil Capacity, and Oil Type

The same trend from the previous generations continues here. Just refer to the discussion on the 2014-2019 Silverado 2500HD. The engine features don’t change. You will still find a 6.0L gas V-8 or an LML Duramax 6.6L turbo-diesel engine in 3500HD. The 6.0L engine needs 6 quarts of oil while the other one requires 10 quarts.

These require SAE 5W-30 for gasoline and SAE 15W-40 for diesel engines. But for ambient temperature before 0 degrees Fahrenheit, the diesel engine needs SAE 5W-40 oil.  

2020-2022 Silverado 3500HD Engine Sizes, Oil Capacity, and Oil Type

Apart from the design modification for more towing and hauling power, the Silverado 3500HD has all other features similar to 2500HD. 

These models also had two engine options: a standard 8-quart-oil 6.6L V-8 L8T and a 10-quart-oil L5P Duramax diesel 6.6L V-8. The only difference is the oil capacity of the 6.6L V-8 L8T, which is 2 quarts more.

The recommended oil types remain unchanged. Buy SAE 5W-30 and SAE 15W-40 for gasoline and diesel engines, respectively. The only exception is when you live in cold regions where the temperature drops to below 0 degrees Fahrenheit. If that is the case, the oil viscosity to buy should be 5W-40.

Conclusion

Choosing the right oil type and servicing your engine on time will help extend its lifespan and enhance its efficiency. Oil helps to lubricate different engine parts and reduces temperature due to friction.

If you want to buy a replacement engine oil, consider your engine type and model year and decide appropriately.