A cold air intake moves the truck’s intake to the outside of the car and increases the engine’s performance with amazing power.
Suppose you’re on the market for the best cold air intake for Chevy Silverado 1500.
In that case, you’ll want an extremely sophisticated model to increase airflow while maintaining a proper air to fuel ratio in your truck.
This post will discuss the best cold air intakes for Chevy Silverado 1500 from 1999 to 2020.
These brands deliver cold air intakes for superior horsepower, excellent throttle response, improved acceleration, and even update the underhood of your truck.
Without further ado, let’s look at the most popular intake systems for the Chevy Silverado 1500 trucks.
Best Cold Air Intakes for Chevy Silverado 1500
Credit: knfilters.com
1. K&N 63-3082 Cold Air Intake Kit
The stock air intake on your 2014 – 2020 Chevy Silverado 1500 leaves you desiring more power.
And that’s where a good cold air intake comes in. I’m talking about the K&N 63-3082 kit to add power and create efficiency on your truck’s V8 or V6 engine.
K&N 63-3082 helps your truck breathe since it opens a clear path for cold air from outside the car.
You will see noticeable performance improvement with more power and throttle.
Even the engine sound will become deeper and louder as you hear the air rushing in.
K&N 63-3082 comes with a wide polyethylene intake pipe textured on the outside but smooth on the inside.
This pipe allows for precise airflow thus, providing maximum gains.
It comes with a large conical air filter that helps move plenty of air needed to get your truck to breathe.
The filter is washable and reusable.
To this end, you will need to clean it every 100,000 miles or depending on how you use the truck.
For example, if you are always on the highway and rarely take off-road trips, it will be a long time between washing the filter.
K&N 63-3082 is compatible with any 2014 to 2020 Chevy Silverado 1500 trucks.
This intake guarantees 50% more airflow than the stock intake.
Furthermore, it will take you approximately 90 minutes to install it in your truck.
All parts have factory-like precision for quick DIY installation.
However, I’d have liked to have a brass breather vent other than the cheap plastic one provided.
Pros
- Robust heat shield
- Includes all necessary installation parts
- No need for ECM reflash
- Oversized conical filter
- Robust HDPE intake tube
Cons
- Plastic NPT vent fitting is cheap
- MAF sensor will require constant cleaning
The K&N 63-3082 brings more torque and horsepower to your truck.
Watch as your vehicle’s towing performance improves as your engine breathes.
Combined with a washable air filter, you can’t go wrong with this kit.
K&N 63-3082 Cold Air Intake Kit
2. MooSun MS-06880 Cold Air Intake System
MooSun MS-06880 is perhaps the most affordable cold air intake system for your truck.
This model is compatible with all 1999 – 2006 Chevy Silverado 1500 pickup trucks.
The 4.3L V6 engine can claim more power with this intake since it can enhance airflow by 64%.
Upon installation, you’ll see up to 10% horsepower and torque increase.
And if you’re up for the attractive vroom noise with a revved-up engine, MooSun MS-06880 is up for it.
The intake also improves acceleration to help the engine function effectively and substantially.
You’ll get a straight metallic pipe of alloy steel for smooth airflow.
The air intake pipe is coupled with an extra-large air filter boasting a synthetic media and steel construction.
This filter is as effective as OEM filters since it’s not an oil filter.
Nevertheless, it’s washable and reusable, but you have to clean it after every 5,000 miles, unlike K&N’s 100,000 miles.
A custom bolt-in heatshield comes in handy to block hot engine air from the intake.
Therefore, the air inside the intake is always cold to ensure high-oxygen airflow.
The installation requires basic tools.
However, the instructions are not clear.
Moreover, it does not have a MAF sensor location, so you may need to modify it.
Pros
- Improves engine’s overall efficiency
- Straight air intake pipe
- Durable steel alloy construction
- Includes reliable heat shield
- Dry air filter, no oiling required
Cons
- Cheap hose clamps
- Needs modification for the MAF and air intake temp sensors
MooSun MS-06880 is for those looking for a cheap air intake system that performs as well as more expensive brands.
You’ll experience better engine torque and efficiency as it pulls in more air for an enjoyable drive.
MooSun MS-06880 Cold Air Intake System
3. SUPERFASTRACING SU38043 Cold Air Intake System
A superior engine means more power and output.
Now you can enjoy the power you require in the 1999 to 2006 Chevy Silverado 1500 trucks with the SUPERFASTRACING SU38043 cold air intake system.
This model is a small investment for immediate gains on your truck’s engine.
I like that the increased airflow improves horsepower by 8 to 10%.
Moreover, it gives you the attractive intake sound that we all desire.
Furthermore, the torque can improve by 6 to 8%.
This kit includes a steel heatshield that allows cooler air to get into the air intake pipe no matter the engine and ambient temperatures.
It installs in a way that creates a less restricted pathway to allow efficient exchange in the combustion chamber.
You’ll like that the intake tube has a durable steel alloy construction. Still, it’s easy to clean the carbon-coated matte finish.
Looking at the filter, you’ll find that it’s a paper-like design with a steel mesh.
It is a dry air filter, so it will need cleaning after every 5,000 miles.
During installation, you will need some elbow grease to tighten the clamps and brackets.
Other than that, anyone can replace their stock air intake with this brand.
Pros
- Extra-large cone air filter
- Durable steel alloy pipe
- Self-explanatory instructions
- Immediate increase in throttle response
Cons
- Fitment at MAF could be better
- Cheap clamps
SUPERFASTRACING SU38043 brings you power and style.
You’ll see a difference in your engine’s responses and impressive torque to show for it.
SUPERFASTRACING SU38043 Cold Air Intake System
4. Auto Dynasty AD-AIP-2-HS-YUKON07-BKBK Air Intake System
Auto Dynasty is another budget-friendly option to ensure maximum engine efficiency.
This air intake system offers a consistent and dependable air-fuel burning ratio so that your truck is always at peak performance.
This model is a direct fit for any 2007 – 2008 Chevy Silverado 1500 trucks.
It comes with all the necessary installation parts that make fitting a breeze.
With a robust T-6061 aluminum tube, it can withstand the rigors of the engine compartment, including substantial temperature differences.
The system makes sure that only cold air gets to the combustion chamber thanks to the two heat shields.
Plus, the pipe’s design matches the engine’s resonance to move more air.
Installation should be easy for anyone who is mechanically inclined because there are no instructions in the package.
It comes with all parts except the Mass Airflow sensor, which is pretty standard.
For the 1500s, you’ll have to remove the battery tray below the old intake process so you can clear the hood without modification.
The air filter is a dry flow synthetic cone filter with a smooth design.
It provides superior air filtration and is 95% more efficient than your OEM air filter.
While it does not need oiling before installation, you may have to clean it after hitting 5,000 miles.
Pros
- Anodized aluminum pipe
- Includes all necessary hardware
- Impressive throttle response
- Smooth intake tube
- Reusable and washable air filter
Cons
- No instructions
- Needs removing battery tray to fit heat shields
Replace your restrictive factory air intake with the Auto Dynasty.
It’s excellent quality for the price and provides all the engine performance increases that you desire after a revamped air intake system.
Auto Dynasty AD-AIP-2-HS-YUKON07-BKBK
5. K&N 63-3085 Cold Air Intake Kit
K&N 63-3085 provides unrestricted airflow to the engine’s combustion chamber.
It is suitable for 2014 – 2018 Chevy Silverado 1500 pickups with a V8 engine.
This air intake is guaranteed to increase your truck’s horsepower and improve its pushing and pulling power.
You’ll notice that your truck accelerates better than before.
It’s a great advantage if you use the freeway on-ramps, all thanks to the detailed design of the K&N 63-3085.
The air intake pipe is made with precision and is dyno-tested to 50% more airflow.
This system pairs with an oversized air filter in a conical design.
An oiled air filter provides up to 100,000 miles between cleaning.
In addition, there’s a custom heat shield to protect the air intake from the engine’s high temperature. Hence, it results in a cooler, denser air intake charge.
All components of the K&N 63-3085 are high-grade.
You will mount them using quality clamps and brackets with steel, aluminum, or silicone construction.
You’ll also get comprehensive installation instructions, so even if you’re not mechanically inclined, you can install this air intake.
Pros
- Precision-designed tube
- Heatshield reduces air intake temperature
- Easy to install in 1.5 hours
- Replaces the entire OEM air intake system
- Improves engine sound and throttle response
Cons
- It does not improve fuel economy
- A bit pricey
Purchase your air intake from a reputable brand and see the value of a less-restrictive air intake system.
This high-performance model lives up to its promise offering excellent fit and improved engine performance.
K&N Cold Air Intake Kit
6. Rough Country 10543 Cold Air Intake
You can gain 5 to 15 horsepower with the Rough Country 10543 Cold Air Intake.
This system will move your stock intakes location to the outside and allow your vehicle to breathe cold, denser air near the fender instead of over the engine.
Rough Country 10543 cold air intake is a direct fit for 2009 – 2013 2WD Chevy Silverado 1500 trucks.
It features a wide intake tube that allows for unrestricted airflow.
What’s more, it has an aluminum tube with a carbon coating to improve durability.
Not to mention, it is dent and rust-resistant, and Rough Country covers you with a lifetime warranty.
A red, oiled filter is a nice touch on a budget-friendly air intake system.
Therefore, you will not be paying to replace the air filter after every 500 miles. Instead, Rough Country can push the servicing miles to 100,000.
This air intake system is relatively easy to install, and the kit comes with detailed instructions.
Nevertheless, knowledge of Rough Country suspension procedures will help you install the parts faster.
Still, you’ll need to check that the bolts and nuts are tight after 500 miles and then every 1000 miles.
Pros
- Increases horsepower
- Improves airflow
- High-quality construction
- Durable, oiled air filter
- Easy to install
- Limited lifetime warranty
Cons
- Not legal in California
- Low-quality clamps
Rough Country 10543 Cold Air Intake provides great value at an affordable price.
From gaining horsepower to better throttle response, you can count on this system to boost the power of your truck.
Rough Country 10543 Cold Air Intake
Conclusion
Get more horsepower, torque, and improved engine performance with the best cold air intake for Chevy Silverado 1500.
I’ve researched the most popular models to bring you only the top-performing brands.
The cold air intakes are heavy-duty, paired with an equally efficient air filter. Finally, installation is a breeze even for newbies.
So, are you ready to increase power in your truck?
Do so with my best picks for your Chevy Silverado 1500.
Read more:
